описание:
Motex 4T-X 10W-40 is a premium performance four-stroke multigrade motorcycle engine lubricant formulated to meet the demands of high performance air and water cooled motorcycles, operating under extreme conditions, both on and off the race track.
Motex 4T-X 10W-40 is formulated with high quality solvent refined and semi-synthetic base stocks, and powerful anti- wear and anti oxidant additive technologies, delivering maximum engine protection under very demanding operating conditions and at the extremes of temperature.
Powerful protection
The Motex 4T-X 10W-40 formulation optimises engine protection and wet clutch operation in both very hot operating temperatures and cold climatic conditions.
Motex 4T-X 10W-40 delivers complete protection against engine wear at all speeds and under varying load conditions. In extreme applications, such as high-speed race situations, Motex 4T-X 10W-40’s sophisticated anti- oxidation, detergency and dispersancy additive systems resist the formation of harmful ring belt and piston skirt deposits, maintaining engine performance and cleanliness at very high temperatures.
Motex 4T-X also delivers maximum wear protection in very low temperature engine starts and operation, in cold climatic conditions, retaining its high performance fluidity and lubrication capabilities at very low temperatures.
Applications
• Recommended for the lubrication of small four-stroke gasoline engines used in motorcycles and portable power equipment such as generators, pumps and lawnmowers.
Performance
• Certified against: ACEA A3 API SL JASO MA
Typical test data |
||
Test |
Test methods |
Results |
Viscosity Grade |
|
10W-40 |
Density, 15°C, kg/l |
ASTM D4052 |
0.873 |
Kinematic Viscosity at 40°C, mm2/s |
ASTM D445 |
100 |
Kinematic Viscosity at 100°C, mm2/s |
ASTM D445 |
14.6 |
Viscosity Index |
ASTM D2270 |
151 |
Pour Point, °C |
ASTM D97 |
-27 |
Flash Point COC, °C |
ASTM D92 |
224 |
Total Base Number, mg KOH/g |
ASTM D2896 |
7.7 |
Sulphated Ash, %wt |
ASTM D874 |
0.9 |
Colour |
ASTM D1500 |
<4.0 |
Copper Corrosion 3 hrs at 100°C |
ASTM D130 |
1a |